New firmware for GX80/GX85

sgt08

Mu-43 All-Pro
Joined
Mar 12, 2011
Messages
1,192
Location
Hong Kong
Real Name
Scott
Right, the only noted change in this firmware is the one I quoted. If you're still on an even older firmware you might only have one sequence for focus bracketing, I think it was the version where it started at the focus distance and then stepped back and forth in both directions (closer and farther - labeled "0/-/+"). A later firmware added the sequence option where it starts at your focus distance and just steps farther away, labeled "0/+"
 

Mike Wingate

Mu-43 Hall of Famer
Joined
Feb 21, 2017
Messages
2,357
Location
Altrincham
Real Name
Mike Wingate
Well at least they are supporting this model. Not many improvements as it works pretty well as is.
 
Joined
May 28, 2017
Messages
88
Location
metro nyc
thank you for the shared info.

i did the update this morning and went from 1.2 -> 1.3 without incident.

then again, i didn't notice any difference or issue before the firmware update.

i do like my gx85 very much.

if it only had an audio in port!

but i knew that when i bought the camera 1.5 yrs ago.

with a mic jack, i could use the video portion more extensively.

all good.

rob
 

cluber77

Mu-43 Regular
Joined
Aug 6, 2013
Messages
113
I’m so disappointed that Panasonic didn’t bring new features to the Gx80/85 cameras with this update.
 
Links on this page may be to our affiliates. Sales through affiliate links may benefit this site.
Mu-43 is a fan site and not associated with Olympus, Panasonic, or other manufacturers mentioned on this site.
Forum post reactions by Twemoji: https://github.com/twitter/twemoji
Copyright © 2009-2019 Amin Forums, LLC
Top Bottom