1. All transactions (buy, sell, and trade) in the Buy & Sell forum are strictly at your own risk. Mu-43.com and its owner are not affiliated with anyone buying, selling, or trading on the board. We are not liable for any misrepresentation, fraud or spam posted here. The remainder of our Buy & Sell forum rules are in the Site Terms of Service, which you can read here: https://www.mu-43.com/help/terms

  2. Welcome to Mu-43.com—a friendly Micro 4/3 camera & photography discussion forum!

    If you are thinking of buying a camera or need help with your photos, you will find our forum members full of advice! Click here to join for free!

COMPLETED FS GH3 Body - Low Shutter Count | Location: Texas USA | Ships: CONUS

Discussion in 'Completed Listings' started by Bif, May 7, 2014.

Thread Status:
Not open for further replies.
  1. Bif

    Bif Mu-43 Top Veteran

    Rating - 100%
    16   0   0

    592
    May 28, 2012
    San Angelo TX
    Bruce Foreman
    FS GH3 Body - $775 - Low Shutter Count 128 | Location: Texas USA | Ships: CONUS

    Buy & Sell Listing - Want to Sell
    Selling
    FS GH3 Body - $775 - Low Shutter Count 128

    Prices
    GH3 Body $775 (price reduced)
    With Honu Cage $825

    Location
    Texas USA

    Ships to
    CONUS

    Description
    My GH3 backup body, project for two cameras never came about. Shutter count is 128 so that shows extremely low usage. Will ship in original (serial numbers match) box with battery, charger, USB cable, manuals, software disk all included as sold to me.

    $775 (price reduced) for body only, add $50 if you want the Honu Cage (www.photographyandcinema.com/collections/camera-cage/products/fhugen-gh3-video-cage) with it. This cage was used once and is in brand new condition, very solid and sturdy. Made to fit the GH3 specifically. This is as low as the price will go, I'll get plenty of use out of it if it doesn't sell.

    Prices include PayPal fees and UPS or FedEX ground shipping in the CONUS. Send PM here or contact me direct at biforeman at gmail dot com

    GH3_&_Box_800x600.

    GH3_800x600.

    Payment accepted
    • Regular PayPal (fee included in price)
    Shipping method
    UPS or FedEX ground

    Shipping charge
    included in price

    Handling time
    One or two days

    References
    hddv.net - Bif, dvxuser.com - Bruce Foreman

    Additional comments
    • Not open to trade offers
    • Not open to offers below asking price (Price is firm)
    • Will ship only to the address on the PayPal transaction details page
    • Buyer must have a PayPal confirmed address
    Acknowledgement
    • I have read and agree to the Buy and Sell rules.
     
  2. aonavy

    aonavy Mu-43 Regular

    Rating - 100%
    7   0   0

    144
    Nov 25, 2012
    Epping NH
    George
    how did you view the camera info in the last picture?
     
  3. Bif

    Bif Mu-43 Top Veteran

    Rating - 100%
    16   0   0

    592
    May 28, 2012
    San Angelo TX
    Bruce Foreman
    Although this is for the GH2, it works quite well on the GH3 (and on the GX7 too). It will feel awkward, trying to push around 3 buttons at a time and then the power switch, usually takes me about 3 tries before I get there...


    IMPORTANT! Change NOTHING while in service mode


    Reading Shutter Count On GH2


    For the GH2 it is a little different:

    To enter the TEMPORARY Service mode (there also exists PERMANENT service mode) do the following:

    1. Make sure you have a NON-EMPTY (with some images) memory card in the camera.
    2. Set the Drive mode lever to Single position

    3. On a TURNED OFF camera push DISPLAY and AF/AE LOCK buttons simultaneously. While holding these two buttons turn on the power.

    Now the camera should be in the temporary service mode. To make sure it is, enter the Setup menu (the one marked with "wrench" icon) and look at the very last page. In the service mode there will be a new item ROM BACKUP. This item is for saving the user settings to and restoring them from a memory card.

    4. Push simultaneously LEFT ARROW and MENU/SET buttons. A menu can pop up or some settings show - don't pay attention to that now. While holding these two buttons push AF/AE LOCK. You can now release all three buttons. The screen will now show a table with the last 16 error codes and their dates. Table navigation is done with the arrow buttons. Error codes are explained in the Service Manual.

    5. Repeat the actions from item 4 once more. Now you will see CAMERA INFO screen. There is the most interesting info:

    VER: full software revision number

    No.: motherboard's serial number

    PWRCNT: Number of power on cycles (including exits from the Sleep mode)

    SHTCNT: Number of shutter activations

    STBCNT: Number of flash activations

    6. If you now push DISPLAY button you will see CAMERA INFO 2 screen. There are several more counters there: Total number of clock settings (ClockSet Cnt), and two more (UnderCut Cnt и RTC Read Err).

    7. By repeating actions from item 4 return the camera into the initial state. The camera can work as usual despite it is still in the service mode.

    Complete exit from the service mode is done when the camera is powered down.
    Posted 19 months ago.
     
  4. spdavies

    spdavies Mu-43 Hall of Famer Subscribing Member

    Rating - 100%
    23   0   0

    Apr 9, 2013
    Hawaii
    Stephen
    PM Sent.
     
  5. Bif

    Bif Mu-43 Top Veteran

    Rating - 100%
    16   0   0

    592
    May 28, 2012
    San Angelo TX
    Bruce Foreman
    Price reduced.
     
  6. rrobinson

    rrobinson Mu-43 Regular

    Rating - 100%
    16   0   0

    46
    Mar 4, 2011
    payment sent for GH3
     
  7. Bif

    Bif Mu-43 Top Veteran

    Rating - 100%
    16   0   0

    592
    May 28, 2012
    San Angelo TX
    Bruce Foreman
    It's on it's way. Tracking shows it left San Angelo tonight.

    Why do I feel like I just sold one of my kids?
     
Thread Status:
Not open for further replies.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.